Tech

Collecting more than just seismic data along the Cascadia Fault

An example of the seabed morphology data acquired with the multibeam echosounder showing eroded seafloor at a submarine canyon head off Grays Harbor, Washington.

Down in the main lab of the R/V Marcus Langseth, you’ll find an array of monitors—46, to be exact!—all displaying information about the data we’re collecting. While many of the screens are dedicated to monitoring the seismic data and the instrumentation related to collecting the seismic data, there are two screens that display data related to the multibeam echo sounder. A multibeam echo sounder is an instrument mounted to the hull of the vessel that emits sound waves in a fan shape beneath the ship. The sound waves travel through the water to the seafloor and back to the instrument. The time it takes for the sound waves to return is used to determine the depth of the seafloor, which gives us information on the shape of the seafloor—known as bathymetry. This information complements the deep subsurface imaging provided by the seismic data.


The two monitors dedicated to the multibeam allow us to control and see the data that is being collected. One of the screens shows the multibeam data in map view, allowing us to see the coverage and set the parameters for the instrument (Figure 1, left screen). The other screen is split into two windows that display the data in real time (Figure 1, right screen). The top window displays the seafloor reflectivity, a measure of the hardness or roughness of the seabed. The bottom window displays the data as a side swath, which essentially is a side view of the data as if we were looking at it from the behind the vessel.

What exactly are we looking for in the multibeam data? In Figure 2, below, we can see a dynamic environment at the seafloor in southern Oregon with gullies, channels, and landslides all imaged along this small section of the margin. In addition to seafloor imaging, modern multibeam systems are capable of imaging gas bubbles within the water column. A methane seep can be seen in the new dataset which corresponds to a previously identified seep that may contain helium leaking from the Earth’s mantle. New imaging techniques (Figure 3) are allowing researchers to better locate where these methane seeps are emanating from the seafloor.

  • Collecting more than just seismic data along the Cascadia Fault
    Figure 1: Picture of the two screens in the main lab dedicated to the multibeam echo sounder. The left screen displays the map of coverage and windows to adjust parameters. The right screen displays the data in real time in two different formats.
  • Collecting more than just seismic data along the Cascadia Fault
    Figure 2: A 3D perspective view of southern Oregon with physiographic annotations and fan view image of a methane seep. More information on methane seep exploration and seafloor mapping is available from NOAA’s Pacific Marine Environmental Laboratory
  • Collecting more than just seismic data along the Cascadia Fault
    Figure 3: Annotated water-column swath of multibeam data with methane seeps identified.
  • Collecting more than just seismic data along the Cascadia Fault
    Figure 4: The coverage of new multibeam bathymetry data collected during our survey. As of June 30, the vessel has collected about 26,500 square kilometers of new data, with the rainbow-colored sections outlining the surveyed area.

Careful review and interpretation of multibeam and sonar data in previous studies reveal thousands of methane seeps all scattered along the Cascadia margin. During our expedition, with the multibeam we have confirmed the location of some of these previously mapped seeps but have also identified some new ones. With careful and attentive eyes, you can spot these methane seeps in real time through the side-sweep window. However, the seeps are small in comparison to the spatial coverage of the multibeam, so they are really easy to miss and can disappear from the screen with a blink of an eye. Because of that, we mainly confirm and identify the methane seeps during the processing steps of the multibeam data. While processing the data, we are able to stack and filter to more accurately image and locate the methane seeps (Figure 3).

The multibeam data can reveal many important and interesting insights about the seafloor. Incorporating the new multibeam data collected on this cruise is one step further to having a complete high-resolution seafloor map and catalog of methane seeps along Cascadia.


Ocean absorption of carbon dioxide compensates for emissions from seafloor methane seeps


This story is republished courtesy of Earth Institute, Columbia University http://blogs.ei.columbia.edu.

Citation:
Collecting more than just seismic data along the Cascadia Fault (2021, July 9)
retrieved 10 July 2021
from https://phys.org/news/2021-07-seismic-cascadia-fault.html

This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no
part may be reproduced without the written permission. The content is provided for information purposes only.



Most Related Links :
usnewsmail Governmental News Finance News

Source link

Back to top button